IAQ High Volume Pumps and Accessories

BUCK BioAire Rotameter

Replacement flow indicators for use with the Zefon Bio-Pump and Bio-Pump Plus.

Brass E-lite adapter

The Zefon Bio-Pump® Plus is the smallest and lightest portable battery powered IAQ sampling pump available. It provides the simplest and most convenient way to sample with Air-O-Cell® and Via-Cell® cassettes at a flow rate of 15LPM. Features: New 'Quick Sample' feature makes sampling...

The Buck Bioaerosol Sampling Pump is compact, lightweight and specifically designed for sampling with Air-O-Cell cassettes. The easy, full-control keypad lets you decide on the length of the retrieval with the touch of a button. Attachable rotameter allows for easy calibration. Both an LED and...

Designed specifically for IAQ sampling, this little pump packs a lot of power. The E-Lite pump produces a high volume of vacuum airflow. Set the rotameter to the flow desired, and use this pump for non-viable mold sampling cassettes, or viable mold sampling impactors. This pump is not recommended...

E-Lite Pump with Case

Buck Bio Slide Sampling Pump The BUCK BioSlide™ Model B1020 Sampling Pump is a compact, lightweight 10-20 LPM controlled flow sampling pump for bioaerosol sampling. The easy, full-control keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy...

This personal air sampler consists of a pump contained in a high-impact RFI/EMI shielded case, exclusive electronic circuit board for constant flow control, an LCD display with 2 lines of 16 characters, a double diaphragm pump mechanism and a rechargeable nickel metal hydride battery pack.

Buck BioAire Replacement Battery

Asbestos/Lead Sampling Stand

IAQ Sampling Stand

Replacement charger for Bio-Pump

Replacement battery for Bio-Pump.

The Bio-Pump remote sampling extension is a 5 ft section of non-restricting tubing which connects to Bio-Pump and allows sampling in small or remote locations.

Debris filter.

120v charger

The EMSL VP-400 is a single stage bioaerosol impaction sampler for the viable sampling of mold and fungi. Made of aluminum, this device consists of a top inlet “cone”, a sampling head impactor that contains over 400 precision drilled holes and a base section for placement of the agar...