Customer Service

 Customer Survey

LABConnect™ - Online Results & More

Tutorial | Create Account | Login

IESO / RIA Standard 6001

Category Materials Testing Lab
Test IESO / RIA Standard 6001
Description

EMSL Fire Related Testing Program

IESO / RIA Standard 6001

Purpose of the test:

This test is designed based on information provided in IESO/RIA Standards 6001 “Evaluation of HVAC Interior Surfaces to Determine the Impact from Fire-related Particulate”. This is a screening method. Char is used as the primary indicator and soot is used as the secondary indicator of fire-related particulate. The analytical methods used in this analysis allow identification of only particles larger than 1 micron. The method assumes that the overwhelming majority of char and soot particles observed originated from the fire. The method is not designed to provide identification of individual char particles nor to determine the origin of soot particles through more advanced analysis such as Transmission Electron Microscopy (TEM) or the analysis of residual fuel by GC/MS.

Sampling

Surface sampling:

  • “Clear” or “Crystal Clear” 3/4” transparent tape 2” in length. “Frosted” type tapes shall not be used.
  •  Alcohol prep wipes

Air sampling:

  • Not applicable

Recommended surfaces for sampling:

Any surface of the HVAC system in contact with the air stream that cannot be penetrated by water or air, such as sheet metal, aluminum foil, or polymeric film used to flexible duct.

Any surface of the HVAC system in contact with the air stream that is capable of penetration by either water or air. Examples include fiber glass duct liner, fiber glass duct board, wood, and concrete.

Samples shall not be obtained from the following locations: painted surfaces, heavily oxidized surfaces, surfaces with water deposits, and surfaces that have grease or non-manufactured oil residue.

Analysis:

This analysis is a screening technique using light microscopy (polarized light microscopy and steromicroscopy) to determine the presence of char and soot (presumptive1). EMSL Analytical also reports the presence of ash as an additional indicator. The standard does not require the quantification of char or soot concentrations. Quantification can be provided by request, however.

The analysis is performed by analysts trained in advanced techniques of particles identification. Additional consultation regarding interpretation of the results and regulations is provided free of charge by senior scientists. Fast turn-around times provided, same day and during week-end analysis available. Our senior scientists have experience in litigation support and expert witness testimony.


 

1: Soot and carbon black particles have nanometer size. Light microscopy is used only as a screening/presumptive method for determining the presence of soot. In order to resolve the submicron size and the aciniform morphology of the particles confirmatory analysis by Transmission Electron Microscopy (TEM) is needed. ASTM D6602 designates TEM as the mandatory evaluation technique for carbon black. Iron oxides (component of rust), titanium dioxide (pigment in paint) have similar morphology and size with soot and they constitute common interference in this analysis. In those cases where there are interferences, other analysis methods should be used such as SEM/EDX and TEM/EDX at additional costs. Analytical alternative methods are not included in this analysis.


Return to View all lab services - I
Ann Arbor, MI (LAB 08) - NVLAP Lab Code 101048-4Atlanta, GA (LAB 07) - NVLAP Lab Code 101048-1Baton Rouge, LA (LAB 25) - NVLAP Lab Code 200375-0Beltsville, MD (LAB 19) - NVLAP Lab Code 200293-0Boston, MA (LAB 13) - NVLAP Lab Code 101147-0Buffalo, NY (LAB 14) - NVLAP Lab Code 200056-0Carle Place, NY (LAB 06) - NVLAP Lab Code 101048-10Charlotte, NC (LAB 41) - NVLAP Lab Code 200841-0Chicago, IL (LAB 26) - NVLAP Lab Code 200399-0Cinnaminson, NJ (LAB List in Description) - NVLAP Lab Code 101048-0Dallas, TX (LAB 11) - NVLAP Lab Code 600111-0Denver, CO (LAB 22) - NVLAP Lab Code 200828-0EMSL Canada - Calgary, AB (LAB 65) - NVLAP Lab Code 500100-0EMSL Canada - Montreal, QC (LAB 68) - NVLAP Lab Code 201052-0EMSL Canada - Ottawa, ON (LAB 67) - NVLAP Lab Code 201040-0EMSL Canada - Toronto, ON (LAB 55) - NVLAP Lab Code 200877-0EMSL Canada - Vancouver, BC (LAB 69) - NVLAP Lab Code 201068-0Fort Lauderdale, FL (LAB 56) - NVLAP Lab Code 500085-0Houston, TX (LAB 15) - NVLAP Lab Code 102106-0Huntington Beach, CA (LAB 33) - NVLAP Lab Code 101384-0Indianapolis, IN (LAB 16) - NVLAP Lab Code 200188-0Jacksonville, FL (LAB 54) - NVLAP Lab Code 600265-0Kernersville, NC (LAB 02) - NVLAP Lab Code 102104-0Las Vegas, NV (LAB 31) - NVLAP Lab Code 600140-0Miami, FL (LAB 17) - NVLAP Lab Code 200204-0Minneapolis, MN (LAB 35) - NVLAP Lab Code 200019-0New York, NY (LAB 03) - NVLAP Lab Code 101048-9Ontario, California (San Bernadino County / Inland Empire) (LAB 71) - NVLAP Lab Code 600239-0Orlando, FL (LAB 34) - NVLAP Lab Code 101151-0Phoenix, AZ (LAB 12) - NVLAP Lab Code 200811-0Piscataway, NJ (LAB 05) - NVLAP Lab Code 101048-2Plymouth Meeting, PA (LAB 18) - NVLAP Lab Code 200699-0Raleigh, NC (LAB 29) - NVLAP Lab Code 200671-0Rochester, NY (LAB 53) - NVLAP Lab Code 600183-0Salem, NH (LAB 23) - NVLAP Lab Code 201051-0San Diego, CA (LAB 43) - NVLAP Lab Code 200855-0San Leandro, CA (LAB 09) - NVLAP Lab Code 101048-3Seattle, WA (LAB 51) - NVLAP Lab Code 200613-0South Pasadena, CA (LAB 32) - NVLAP Lab Code 200232-0South Portland, ME (LAB 62) - NVLAP Lab Code 500094-0St. Louis, MO (LAB 39) - NVLAP Lab Code 200742-0Tampa, FL (LAB 93) - NVLAP Lab Code 600215-0Wallingford, CT (LAB 24) - NVLAP Lab Code 200700-0West Palm Beach, FL (LAB 57) - NVLAP Lab Code 600206-0
Sorry, this function is disabled.